Precision Die CuttingThe cost reduction process begins with an understanding of the requirements for providing raw materials or solutions to provide samples and orders after the product is available. To understand this, the cost of die-cutting is obvious.

First, say the product quote. For the accounting summary of product costs, it can be divided into:

1. The cost before die-cutting mainly includes the following parts: Raw material cost, freight, raw material processing cost (cutting, rewinding, whether the die-cutting manufacturer's own cutting or raw material supplier cutting). Die-cutting auxiliary materials (such as protective film, off-paper, filling foam, release agent, etc.), auxiliary material processing costs, labor costs (workers ' wages are unavoidable) costs. Of course, suppliers of raw materials or auxiliary materials have requirements for the quantity of materials ordered and should also be described in the quotation form.

2.Die-cutting processing plantThe main costs are: start-up fee (at least electricity bill required), precision machining and stamping costs [we generally calculate the net area of feed (machine wear cost should be recycled)], material die-cutting gap loss (not all requirements gap, but not glue general 2MM jump 3MM,0.5MM fillet, tape and other materials depending on the situation, Basically according to the thickness and material left gap, easy to peel), overall wear (no one can guarantee 100% authenticity, the general loss rate of 5/1000).

3. The costs incurred after die-cutting mainly include: Labor costs (such as the need for manual abandonment of complex items, quality inspection, packaging, etc.), as well as packaging costs (packaging material costs, such as cartons, packaging film), freight and so on.

Secondly, we discuss the cost of proofing, generally including three parts: raw materials, knife mold fees and boot fees. Raw materials can usually be saved. The boot fee is insufficient unless special and expensive materials are used. The cost of a simple mold is not high. However, if the requirements of the product are strict and complex, and the number is large, the cost of the mold will undoubtedly become heavy, so the work must also be cautious. Minimize unnecessary overhead. But technology spending is not sustainable. The sample confirmed the strength.