Die-cutting Prototyping isDie-cutting production plantThe supplement, mainly dealing with high-volume die-cutting before the proofing version and knife-free mold small batch cutting work of special equipment. At present, the domestic prototype of the stand out, become die-cutting engineering master of the sharp weapon. Die-cutting prototypes can cut the electronics industryMagnetic material die-cutting, Optoelectronic materials, shielding materials,Thermal material die-cuttingCutting, proofing, small batch consumption, insulation materials, optoelectronic materials, shielding materials, viscose products, such as proofing and knife-free mold small batch consumption. Able to process 1.5mm thick insulating materials, photoelectric materials, shielding materials, viscose products, the thickest 2mm of electronic materials.

But in the face of so many varieties of prototypes in the market, how can we choose? The following small series will take you to make a simple understanding:
Working principle of die-cutting prototyping

Die-cutting prototype demand cutting CAD file imported die-cutting prototype, through the die-cutting prototype comes with the AOKECUT software to cut the stop setting, certainly cut, semi-wear, full wear position and successively, and then spread the processing of the material, with "Mi paper to the graph method" to a good processing position. According to the "Beginning processing" button, the machine is the beginning of the work, automatically open the vacuum suction air pump, the data fixed on the workbench surface, the machine according to the original set of the beginning of processing, processing end, vacuum suction air pump automatic stop, remove the processed products, work finished.
The composition of die-cutting prototyping parts

1, motion control system;
2, motor and drive system;

3, data interface;, =

4, file input and output system;

5, cutting tool head;

6, vacuum suction air pump;

How to choose
Model problem: According to your needs proofing products to resolution the size model of the machine you choose. If it is mobile phone accessories, the fundamental 900X600mm model has been enough, if it is a large size diffusion film, reflective film, on the need for a larger size of the equipment, such as 1500X1200mm, such a large small product can be cut, die-cutting prototype is to replace manual proofing. Will save you a lot of proofing costs and save time.

Die-cutting material problem: Of course, die-cutting prototype on the material also has certain requirements. Finally can cut 2MM, if it is a harder thing can only cut about 0.8MM. Compared to foam cotton beyond the 1MM cutting effect is not very ideal.

Brand Problem: Today's die-cutting prototype is also really a variety, there are domestic imported, expensive have cheap, the price of imports is about 2-3 times domestic, cutting speed is slow, but the quality is better, domestic die-cutting prototype speed, cutting accuracy than the import machine has a little gap. Enough to choose based on whether you are a product requirement.

Sales after-effects labor problem: to choose the sale of after-effects labor dot compared to perfect producers, there are warranty issues. Under normal conditions, there are any problems in the first year, and the producers are repair for a year.